Konferans 2020-2029 yılları

Permanent URI for this collection

https://kurumsalarsiv.tenmak.gov.tr/handle/20.500.12878/1668

Browse

Browsing Konferans 2020-2029 yılları by Publisher "Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK)"

Now showing 1 - 9 of 9
  • No Thumbnail Available
    Item
    ASSESSING CYANEX 272 and BINARY EXTRACTANTS for the SEPARATION of PRASEODYMIUM and NEODYMIUM in EXTRACTION of ESKİŞEHİR – BEYLİKOVA RARE EARTH ORES
    (Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK), 2024-04-26) Gezici, Utku Orçun; Baştürkcü, Esra; Arslan-Kaba, Mehtap; Ertürk, Selim; Sözer, Belma Soydaş; Kartal Şireli, Güldem; Timur, Servet
    Rare earth elements (REEs) are essential in various industrial applications due to their high magnetic susceptibility, low density, and thermal stability. Praseodymium is used in producing yellow pigments for glass and ceramics, while Neodymium is crucial in producing powerful permanent magnets and laser applications. Technological advancements have driven the demand for Pr and Nd and increased the need for a reliable supply chain. The primary sources of Pr and Nd are minerals like monazite, bastnasite, and xenotime, which require complex separation processes due to their mixed contents. The main secondary sources include electronic waste, particularly from permanent magnets. The difficulty in the extraction of REEs lies in their closely related chemical and physical properties. Solvent extraction (SX), based on differences in ionic radii, is a widely used method for REE separation in industrial applications. Nevertheless, the similarity in Pr and Nd ionic radius complicates their separation compared to other REEs. This research examined the effectiveness of Cyanex 272 in the SX process for separating Pr and Nd, as well as its potential for improvement through the use of binary extractant combinations viz. Cyanex 572, Cyanex 801, Cyanex 923, as well as DEHPA. The synthetically prepared aqueous solution was composed of 400 ppm Pr and 800 ppm Nd. The extraction efficiency and selectivity were determined by using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). The findings revealed that the loading efficiencies for Pr and Nd varied with the concentration of Cyanex 272, namely Pr loading efficiencies ranging from 5.5% to 24.4%, and Nd from 6.7% to 31.3%. Notably, binary extractant experiments indicated that mixtures incorporating Cyanex 272 with DEHPA, Cyanex 572, and Cyanex 801 exhibited enhanced extraction efficiencies compared with the sole Cyanex 272. On the other hand, the combination of Cyanex 272 and Cyanex 923 resulted in a diminished extraction efficiency. These obtained outcomes could potentially adapt to the development of domestic technology for the extraction of REEs from the Eskişehir Beylikova REE Ores.
  • Thumbnail Image
    Item
    ÇAY BİTKİSİNDE YENİ ÇEŞİTLERİN ELDE EDİLMESİ AMACI İLE ETKİLİ MUTASYON DOZUNUN BELİRLENMESİ DETERMINATION OF THE EFFECTIVE MUTATION DOSE FOR THE PURPOSE OF OBTAINING NEW VARIETIES IN TEA PLANT
    (Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK), 2024-04-29) GÖKSU KARAOĞLU, Burcu; YAZICI, Keziban; KANTOĞLU, Yaprak; KUNTER, Burak; AKA KAÇAR, Yıldız
    Çay dünyada sudan sonra en fazla tüketilen içecek bitkisidir. Türkiye’de sadece Doğu Karadeniz bölümünde yetiştiriciliği yapılmaktadır. Yetiştiriciliğin yaygınlaşmaya başladığı tarihten bu yana tüm bahçeler tohumla tesis edilmiş olup klon çay çeşitleri ile tesis edilmiş bahçeler bulunmamakta bu da verim ve kaliteye etki etmektedir. Çay bitkisinde heterezigoti oranının yüksek olması ve kendine uyuşmazlık mekanizmasının varlığı ıslah çalışmalarının süresini uzatmaktadır. Mutasyon ıslahı, çay bitkisinde genetik çeşitlilik ortaya çıkarmak için hızlı ve pratik bir yöntemdir. Çay üretiminde önemli olan Çin, Hindistan, Kenya ve Sri Lanka gibi ülkelerde mutasyon ıslahı ile ticarete konu olan önemli çay çeşitleri geliştirilmiştir. Ülkemizde ise bu konuda bir çalışma yapılmamıştır. Bu çalışmanın amacı çayda mutasyon ıslahı yöntemini kullanarak varyasyon yaratmak ve yeni çay çeşit adayları geliştirmektir. Çalışmamız Recep Tayyip Erdoğan Üniversitesi, Ziraat Fakültesi, araştırma seralarında 2020 ile 2023 yılları arasında yürütülmüştür. Çalışmada materyal olarak kullanılan Zihni Derin çay çeşidine ait 3-4 gözlü sürgünlere Türkiye Enerji Nükleer ve Maden Araştırma Kurumu’nda İzotop marka “Ob-Servo Sanguis Co-60 Research Irradiator” model gama ışınlama cihazı ile 0, 10, 20, 30, 40, 50, 60 ve 70 Gy dozlarında ışınlama yapılmıştır. Işınlamadan sonra tek gözlü olarak alınan çay çelikleri torf-vermikulit karışımına dikilmiştir. Farklı dozlarda gama ışını uygulanan çay çeliklerinin canlılık ve köklenme oranları belirlenmiş büyüyen çay fidanlarında ise sürgün uzunluğu (mm) ölçümleri yapılmıştır. Sürgün uzunluğuna göre yapılan probit regresyon analizine göre “Etkili Mutasyon Dozunun’’ 11,45 Gy olduğu tespit edilikten sonra ana mutant populasyonu oluşturmak için çay çelikleri üzerine bu doz uygulanmıştır. Uygulamadan sonra M1V1 generasyonu oluşturulmuştur. M1V1 generasyonu Ek-2 üzerinde ölçüm ve gözlemler yapılmıştır. Çalışmanın sonucunda, M1V1-V3 generasyonlarında mutant çay bitkilerinde büyük oranda varyasyon meydana geldiği belirlenmiştir. Bu çalışma ile 140 adet mutant çay genotipi elde edilmiş olup, bu genotipler Ulusal Çay Gen Havuzumuza aktarılacaktır. Tea is the second most consumed beverage plant in the world after water. It is only cultivated in the Eastern Black Sea region of Turkey. Since the beginning of cultivation, all gardens have been established with seeds, and there are no gardens established with clonal tea varieties, which also affects yield and quality. The high heterozygosity rate in tea plants and the presence of self-incompatibility mechanisms prolong the duration of breeding studies. Mutation breeding is a rapid and practical method for generating genetic diversity in tea plants. Important tea varieties that are traded have been developed through mutation breeding in countries such as China, India, Kenya, and Sri Lanka, which are important in tea production. No studies have been conducted on this issue in our country. The aim of this study is to create variation and develop new tea variety candidates using the mutation breeding method in tea. Our study was conducted at the Research Greenhouses of Recep Tayyip Erdogan University, Faculty of Agriculture, between 2020 and 2023. In the study, 3-4-eyed shoots belonging to the Zihni Derin tea variety were irradiated with gamma rays at doses of 0, 10, 20, 30, 40, 50, 60, and 70 Gy using the “Ob-Servo Sanguis Co-60 Research Irradiator” model gamma irradiation device of the Turkish Energy Nuclear and Mineral Research Agency. After irradiation, tea cuttings were taken as single eyes and planted in a mixture of peat and vermiculite. The viability and rooting rates of tea cuttings irradiated with different doses of gamma rays were determined, and the shoot length (mm) measurements were made in the growing tea seedlings. The probit regression analysis performed according to the shoot length, the “Effective Mutation Dose” was found to be 11.45 Gy. After the application with 11.45 Gy, the M1V1 generation was created. Measurements and observations were made on the M1V1 generation. According to the results of the study, a large amount of variation occurred in mutant tea plants in the M1V1-V3 generations. With this study, 140 mutant tea genotypes were obtained, and these genotypes will be transferred to our National Tea Gene Pool.
  • No Thumbnail Available
    Item
    Cereals, Grains and Legumes Irradiation for Türkiye: Past, Present and Future Opportunities Türkiye için Tahıl ve Bakliyat Işınlaması: Geçmiş, Bugün ve Gelecekteki Fırsatlar
    (Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK), 2024-05-30) Çetinkaya, Nurcan; İç, Erhan; Yalçıntaş, Mehmet
    Irradiation of cereals, grains and dry legume seeds for phytosanitary purposes is not a new idea. To date, in addition to the research phase, many system installations for commercial applications have been carried out. The oldest of these enterprises started operating in Türkiye in 1967 with the cooperation of the Turkish Government and UN organizations. It was a short-lived enterprise because of not receiving sufficient public support. The objectives of this paper are consideration the potential of cereals, grains and dry legume seeds irradiation and also new application such as EB or X-ray approaches in food irradiation. Phytosanitary irradiation has important advantages especially for food security. Ukraine and China have been gained industrial irradiation experience in the application of EB sources as an alternative to gamma sources. Recently the number of companies with field experience in industrial EB applications and offering alternative design opportunities is increasing. Since Türkiye is a major cereal grain, and pulses producer and exporter, the insect infestation is an important problem. Temperature is the most important environmental factor influencing insect population dynamics, global climate change is expected to cause an expansion of their geographic range. As climate change exacerbates the pest problem, there is an urgent need for new pest management solutions. Instead of conventional methods, EB/X-ray irradiation at very low doses and irradiation of bulk grains & cereals and packaged legume seeds have significant potential. Consequently, potential scenarios for the Turkish market regarding the irradiation of such products with EB/X-ray are high potential. The most economical option seems EB for bulk grains & cereals and X-ray systems for packaged legume seeds. Türkiye için Tahıl ve Bakliyat Işınlaması: Geçmiş, Bugün ve Gelecekteki Fırsatlar Tahılların ve kuru baklagil tohumlarının bitki sağlığı amacıyla ışınlanması yeni bir fikir değildir. Bugüne kadar araştırma aşamasının yanı sıra ticari uygulamalara yönelik birçok sistem kurulumu gerçekleştirilmiştir. Bu işletmelerin en eskisi 1967 yılında Türk Hükümeti ve BM kuruluşlarının işbirliğiyle Türkiye'de faaliyete geçmiş ancak yeterli kamuoyu desteği alamadığından kısa ömürlü bir girişim olarak kalmıştır. Bu makalenin amacı tahıllar ve kuru baklagil tohumlarının ışınlama potansiyelini ve ayrıca gıda ışınlamasında EB veya X-ışını yaklaşımları gibi yeni uygulamaları dikkate almaktır. Bitki sağlığı ışınlaması özellikle gıda güvenliği açısından önemli avantajlara sahiptir. Ukrayna ve Çin, gama kaynaklarına alternatif olarak EB kaynaklarının uygulanmasında endüstriyel ışınlama deneyimi kazanmıştır. Son dönemde endüstriyel EB uygulamalarında saha tecrübesi olan ve alternatif tasarım fırsatları sunan firmaların sayısı giderek artmaktadır. Türkiye önemli bir tahıl, bakliyat üreticisi ve ihracatçısı olduğundan böcek istilası önemli bir sorundur. Sıcaklık, böcek popülasyon dinamiklerini etkileyen en önemli çevresel faktör olup, küresel iklim değişikliğinin böceklerin coğrafi yayılımının genişlemesine neden olması beklenmektedir. İklim değişikliği haşere sorununu ağırlaştırdıkça, yeni haşere yönetimi çözümlerine acil ihtiyaç duyulmaktadır. Geleneksel yöntemlerin yerine, çok düşük dozlarda EB/X-ışını ışınlaması ve yığın halinde tahıllar ile paketlenmiş baklagil tohumlarının ışınlanması önemli bir potansiyele sahiptir. Sonuç olarak, bu tür ürünlerin EB/X-ray ile ışınlanmasına ilişkin Türkiye pazarı için uygun senaryolar yüksek potansiyele sahiptir. En ekonomik seçenek, yığın halindeki tahıllar için EB ve paketlenmiş baklagil tohumları için X-ışını sistemleri gibi görünmektedir.
  • Thumbnail Image
    Item
    Effect of Hydrogen Decrepitation Temperature and Milling on Crystal Structure and Particle Size of End-of-Life NdFeB Magnets
    (Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK), 2024-08-16) Saritas, Senem; Habibzadeh, Alireza; ARIK, Muhammet Nasuh; GÖKELMA, Mertol; Çakır, Öznur
    Recycling NdFeB magnets from secondary sources is a vital strategy for addressing the supply risks associated with critical raw materials such as Neodymium (Nd) and Dysprosium (Dy). Among various recycling methods, Hydrogen Decrepitation (HD) is recognized as an efficient process for recovering the end-of-life (EoL) magnets. This study aims to examine the impact of different HD temperatures on the crystal structure and particle size of milled HDNdFeB. End-of-Life (EoL) NdFeB magnets were subjected to HD process at ambient pressures and varying temperatures between 30°C to 200°C. It was observed that increasing the HD temperature up to 50°C exhibits a shift to lower 2θ angles in XRD crystal patterns while further increasing the HD temperature resulted in reversed behavior. The optimum HD process, according to the XRD results, showed 92.7% Nd₂Fe₁₄BH (Neodymium Iron Boride Hydride) along with some oxide phases. It was revealed that following milling of the optimum HD powders, the crystallite size decreased from 12.512 Å to 302 Å and this reduction is accompanied by a dramatic shift to higher angles. Overall, the milling resulted in a particle size distribution of 10µm (Dv50)
  • No Thumbnail Available
    Item
    Effects of Two Different Gamma Ray Sources on In Vitro Shoot Explantation of Fraser Photinia and Determination of Effective Mutation Dose
    (Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK), 2024-12-03) Türkmen, Onur Sinan; Kantoğlu, K. Yaprak; Ellialtıoğlu, Ş. Şebnem
    Fraser photinia (Photinia × fraseri cv. Red Robin) is widely preferred as ornamental plant in garden designs due to environmental resilience and decorative feature. Considering the increasing adaptation capacity of the existing varieties of the species to changing climatic conditions, efforts to develop new varieties with high attractiveness to the market have started to increase. The in vitro mutation breeding method has serious potential for expanding the existing variability for this species, which is prone to in vitro propagation. Determining the applicability of ionizing gamma ray sources for in vitro mutation studies on Fraser photinia is crucial. In this study, two different gamma-ionizing radiation sources cesium 137 (137Cs) and cobalt 60 (60Co) were used to determine the radiation sensitivity of in vitro shoot explants, and effective mutation dose (EMD50) values were determined for the sources. For this purpose, in vitro shoot explants were irradiated at thirteen different doses ranging from thirteen different doses (0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 130 Gy) with 60Co (Dose rate: 235 Gy/h) and 137Cs (Dose rate: 821 Gy/h) gamma ray sources. Thirty days after irradiation, shoot length and number of leaves were measured in in vitro plantlets, and EMD50 values were calculated by linear regression analysis. The EMD50 dose based on the number of leaves as a result of cesium-137 source ray application was determined as 60.34 Gy, while this value was determined as 80.88 Gy for cobalt- 60 source. According to these results, it was seen that the source power, irradiation time, and the effect created by the linear energy transfer value of the beam during tissue penetration were effective on the EMD50 dose difference.
  • No Thumbnail Available
    Item
    Production of Metallic Lanthanum from Its Oxide Form via Molten Salt Electrolysis
    (Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK), 2024-04-26) Özer, Osman Can; Arslan Kaba, Mehtap; Kartal Şireli, Güldem; Soydaş Sözer, Belma; Timur, Servet
    Lanthanides, including the elements with the atomic number of 57 to 71, scandium, and yttrium are the seventeen chemically related elements known as rare earth elements (REEs). Despite their misleading name, “rare earth”, these elements are not rare in the Earth’s crust. Instead, the term refers to the challenge of separating and obtaining them in their pure form due to their similar chemical properties. REEs are crucial in a variety of high-technology applications, namely the military, the automobile industry, electrical engineering, optics, catalysts, wind turbines, and other sustainable energy systems, due to their exceptional physical and chemical properties. Because of the growing demand for REEs in functional materials, the recovery of REEs from secondary resources has become critical to the transition to a green economy. The primer REEs extraction process consists of mining, physical beneficiation, chemical treatments, separation, and reduction. In the reduction step, where REEs reduce to metal form, electrolytic methods (molten salt electrolysis) and metallothermic methods are prominently discussed in the open literature. Electrolytic methods can operate continuously and outperform metallothermic techniques in terms of production capacity and controllability, as well as product purity. Nowadays, two types of electrolytes are commonly used in the electrolytic production of REEs: fluoride- and chloride-based molten salts. The main issues with the widely used electrochemical extraction of rare earth oxides in fluoride-based molten electrolytes are lower solubility and lower energy efficiencies, as well as higher emissions of greenhouse gases, such as CO2 and perfluorocarbons, which are extremely harmful to the environment. Given the current limitations of fluoride systems, molten chloride-based electrolytes appear to be a preferable option. To achieve lower melting points (e.g., 650 °C) and higher product purities (i.e., 99%), common chloride electrolytes are composed of RECl3 (RECl3= rare earth chlorides) and additional chlorides, such as NaCl, KCl, BaCl2, and CaCl2. Thus, we concentrated on molten salts based on chlorides containing RECl3. To overcome the low solubility of rare earth oxides in molten chloride salts and toxic oxychloride formations, RECl3 salts were used. RE2O3 was converted to RECl3 in a separate system through chlorination. Furthermore, the need to work in a controlled atmosphere due to REEs high oxygen affinity made the electrolysis cell design critical. As a result, the electrochemical cell was designed and installed, and the effects of process parameters such as electrolyte composition, temperature, current efficiency, and electrolysis time were investigated systematically. X-ray diffractometry (XRD) and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) were used to characterize the produced La. The maximum current efficiency was found to be 73.5%. These obtained results could potentially be implemented during the development of domestic technology for the electrolytic extraction of REEs from Turkey Eskişehir Beylikova REEs ores.
  • No Thumbnail Available
    Item
    SELECTIVE SEPARATION of LANTHANUM USING DEHPA: INVESTIGATING THE POTENTIAL of EXTRACTING RARE EARTH ELEMENTS from ESKISEHIR BEYLIKOVA ORES
    (Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK), 2024-04-26) Tunç, Melike; Gezici, Utku Orçun; Özer, Osman Can; Arslan Kaba, Mehtap; Soydaş Sözer , Belma; Kartal Şireli, Güldem; Kartal Şireli, Güldem; Timur, Servet İ.
    Rare Earth Elements (REEs) are essential components of advanced technology applications such as renewable energy, electronics, and defense. Their unique magnetic, catalytic, and luminescent properties render them essential for the development of high-performance materials. However, efficient and selective separation of individual REEs is a significant challenge owing to their chemical and physical similarities. This study focuses on the selective separation of lanthanum (La) from complex mixtures of REEs as it is crucial for the sustainable extraction of Eskişehir Beylikova Rare Earth Ore. In this study, solvent extraction (SX), a critical method for separating REEs, was carried out by using di (2-ethylhexyl) phosphoric acid (DEHPA) as the extractant. The selection of DEHPA was done based on its proven efficiency in REE SX processes, which offers a balance between selectivity and extraction capacity. For this purpose, various DEHPA concentrations in the organic phase were studied to obtain the optimal conditions for the selective separation of La from the leach liquor. The synthetically prepared leach liquor contained 5000 ppm La, 400 ppm Pr, 800 ppm Nd, and 200 ppm Sm. Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) was utilized to determine the precise ion concentrations in the initial and extracted aqueous phases which ensured the accurate assessment of the extraction efficiency and selectivity. These initial findings revealed that the loading pattern is as follows: initial larger ionic radius La3+ (1.16 Å) loaded than after Pr3+ (1.13 Å), Nd3+ (1.11 Å), and Sm3+ (1.08 Å) came. The organic concentration was prepared ranging from 0.03M to 0.9M in kerosene. The loading efficiencies for La varied from 1.95% to 84.5%, whereas those for Sm, Pr, and Nd varied from 77.61% to 100%, from 41.69% to 99.17%, and from 27.78% to 97.68%, respectively, with increasing DEHPA concentrations. The outcomes demonstrated the feasibility of selective separation of La from other REEs using 0.03M DEHPA. The obtained results could be potentially adopted for the domestic production of REEs in the Eskişehir Beylikova Rare Earth Ores.
  • No Thumbnail Available
    Item
    SELECTIVE SEPARATION OF SAMARIUM FROM LIGHT RARE EARTH ELEMENTS via pH-CONTROLLED SOLVENT EXTRACTION
    (Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK), 2024-04-26) Tunç, Melike; Gezici, Utku Orçun; Baştürkcü, Esra; Ertürk, Selim; Soydaş Sözer, Belma; Kartal Şireli, Güldem; Timur, Servet
    Rare Earth Elements (REEs) are essential for advanced technologies due to their unique properties. This study presents a pH-controlled solvent extraction method to separate Samarium (Sm) from light REEs simulating Beylikova REE leaching liquid. The process, utilizing 0.75 M DEHPA in kerosene, showed that Sm achieved a 59% extraction efficiency at pH 0.5, significantly higher than La, Pr, and Nd. This pH optimization enhances the sustainability and efficiency of REE extraction, promoting the effective utilization of Turkey's REE resources and domestic technologies.
  • Thumbnail Image
    Item
    Synthesis, Characterizations and Applications of Organo-Rare-Earth-Metal Complexes for Organic Light Emitting Diode Applications
    (Türkiye Enerji, Nükleer ve Maden Araştırma Kurumu (TENMAK), 2024-04-26) MARAŞLIOĞLU, Cem; CEVHER, Şevki Can; CANIMKURBEY, Betül; CAMCI, Merve Taner; ÇIRPAN, Ali
    Lighting technologies are an indispensable part of this era and cover a wide area in many fields such as primary lighting and lighting in imaging sectors. Among these lighting technologies, organic light emitting diodes (OLEDs) attract attention due to their low potential operation, easy application to large areas, flexibility, lightness and high resolution. On the other hand, it is seen in the literature that organometallic complexes synthesized by using transition metals and some rare earth metals operate with high efficiency. This study is initiated by the motivation to increase the diversity in OLED applications and to synthesize applicable electroluminescent organometallic materials with high performance criterias. While imidazole derivatives, which are known to emit blue light are easy to synthesize and derivatize, were chosen as organic components, Europium (Eu), Lanthanium (La) and Terbium (Tb) metals were preferred as metals to be used in organometallic complexes. Imidazole-derivatives, which have electroluminescence alone, are expected to have high-intensity and narrow emission band possessing emission in their metal complexes taking advantage of the shielding properties of electrons in the outer orbit of rare earth metals (REMs) and inhibition of f-f electron transition. Structural characterizations are done by using infrared (IR) spectroscopy, 1H-NMR and 13C-NMR, optical characterizations are performed by UV-Vis spectroscopy (UV) and photoluminescence (PL) spectroscopy, electronical characterizations are completed by Cyclic Voltammetry (CV). Finally, the OLED applications has been completed and measured as external quantum efficiencies (EQEs), photoluminescence quantum yields (PLQYs), turn-on voltages and current density-voltage curves.