Klinik lineer hızlandırıcıların su fantomundaki doz dağılımlarının Monte Carlo yöntemi ile elde edilmesi
Loading...
Files
Date
2011
Journal Title
Journal ISSN
Volume Title
Publisher
Türkiye Atom Enerjisi Kurumu
Abstract
Radyasyon terapisinde Monte Carlo hesaplamaları için çeşitli kodlar kullanılmaktadır. Bu çalışmada, sudaki doz dağılımlarında Siemens Primus klinik lineer hızlandırıcılardan (LINAC) fotonların fiziksel parametrelerinin etkileri için yeni bir Monte Carlo Simülasyon Programı (MCSP) geliştirilmiştir. MCSP, fotonların madde ile etkileşimleri dikkate alınarak yazılmıştır. Burada iki başlıca etkileşme dikkate alınmıştır: Compton saçılması ve
fotoelektrik olay. Bir nokta kaynaktan yayınlanarak su fantomu yüzeyine gelen fotonlar, bremsstrahlung ışınlarıdır. Foton takibinin yapılabilmesi için bu fotonların enerji dağılımlarının bilinmesi gerekir. Maksimum
enerjisi 6 MeV (6 MV foton modu) olan bremsstrahlung fotonları dikkate alınmıştır. 6 MV foton modunda, yayınlanan fotonların enerjileri, Mohan tarafından deneysel olarak elde edilen enerji dağılımından örneklenmiştir (Mohan at al 1985). Simülasyonun doğruluğunu ve performansını incelemek için, ölçülen (deneysel) ve hesaplanan (MCSP) yüzde derin doz eğrileri ve doz profilleri, karşılaştırılmış ve birbirleriyle iyi bir uyum göstermektedir.
Different codes were used for Monte Carlo calculations in radiation therapy. In this study, a new Monte Carlo Simulation Program (MCSP) was developed for the effects of the physical parameters of photons emitted from a Siemens Primus clinical linear accelerator (LİNAC) on the dose distribution in water. For MCSP, it was written considering interactions of photons with matter. Here, it was taken into account mainly two interactions: The Compton (or incoherent) scattering and photoelectric effect. Photons which come to water phantom surface emitting from a point source were bremsstrahlung photons. It should be known the energy distributions of these photons for following photons. Bremsstrahlung photons which have 6 MeV (6 MV photon mode) maximum energies were taken into account. In the 6 MV photon mode, the energies of photons were sampled from using Mohan’s experimental energy spectrum (Mohan at al 1985). In order to investigate the performance and accuracy of the simulation, measured and calculated (MCSP) percentage depth dose curves and dose profiles were compared. The Monte Carlo results were shown good agreement with experimental measurements.
Different codes were used for Monte Carlo calculations in radiation therapy. In this study, a new Monte Carlo Simulation Program (MCSP) was developed for the effects of the physical parameters of photons emitted from a Siemens Primus clinical linear accelerator (LİNAC) on the dose distribution in water. For MCSP, it was written considering interactions of photons with matter. Here, it was taken into account mainly two interactions: The Compton (or incoherent) scattering and photoelectric effect. Photons which come to water phantom surface emitting from a point source were bremsstrahlung photons. It should be known the energy distributions of these photons for following photons. Bremsstrahlung photons which have 6 MeV (6 MV photon mode) maximum energies were taken into account. In the 6 MV photon mode, the energies of photons were sampled from using Mohan’s experimental energy spectrum (Mohan at al 1985). In order to investigate the performance and accuracy of the simulation, measured and calculated (MCSP) percentage depth dose curves and dose profiles were compared. The Monte Carlo results were shown good agreement with experimental measurements.
Description
TENMAK D.N.. 9960
Keywords
Monte Carlo simulation, Monte Carlo simülasyonu, Radiotherapy, Radyoterapi, Thermoluminescence, Termolüminesans, Alumina, Alümina, Dose response, Doz cevabı, Seydişehir alüminası
Citation
Tartar, A. [ve arkadaşları]. (2011). Klinik lineer hızlandırıcıların su fantomundaki doz dağılımlarının Monte Carlo yöntemi ile elde edilmesi. Ankara : Türkiye Atom Enerjisi Kurumu.